|
|
Post by Jonathan Josol on Feb 6, 2008 7:34:31 GMT 8
Share your methods of how you maintain your beloved airguns whatever type it may be. For me, this what I do: - I clean my AG when I get home and put some oil where needed.
- Also I always make it a point to have CO2 in its tank to keep the O-ring seal in good condition.
- Also when filling my AG with CO2, I put in some light oil on the intake valve so that the internals will have some oil in it.
|
|
daLe
New Member
Posts: 23
|
Post by daLe on Feb 6, 2008 11:46:00 GMT 8
Same here, i also put oil to remove the sediments and sweat on the blued part of the AG.
|
|
|
|
Post by heightaddict on Mar 28, 2008 13:13:42 GMT 8
hello guys,
like to add some points in maintenance.
1. petroleum based oil is bad for orings
2. oil within your system will result to inconsistency
3. same with heavy grease in the hammer area, this will also attract dirt and dust resulting to sludge.
a good screen or filter in the co2 adaptor will stop any foreign objects like dirt or metal from entering your system that might result to leaks.
clean LESS, shoot MORE. clean barrel only when groups is erratic. just like F/A, they should be fouled prior to shooting.
airguns should be dry, wipe off excess oil. hunged or kept inside a gun cabinet. dessicants helps absorbing moisture when kept in nylon bags, good for scopes. should be fully charged (i had no problem with this for years, tanks should always be half full. empty tanks will invite moisture and oxidation resulting to rusting inside.
good silicone oil for orings, TIRE BLACK
hope this helps
|
|
|
|
Post by snyper on Mar 29, 2008 1:08:48 GMT 8
nice info sir
|
|
|
|
Post by bremboj29 on Apr 23, 2008 19:13:55 GMT 8
ok po ba silicon oil spray gamitin?
|
|
|
|
Post by snyper on Apr 24, 2008 5:55:18 GMT 8
as long as it is not petrol based bro it should be ok.
|
|
cobra
Full Member
Posts: 105
|
Post by cobra on Mar 21, 2009 17:44:40 GMT 8
Bro.,
Yung tire black silicon oil yun? Ano ang SAE rating nito? Wala kayang additives ito kagaya ng motor oil (synthetic)?
Asking you this because (synthetic) oils and grease used in the automotive industry does necessarily mean it is good for your AG. Yung synthetic motor oil may detergents yun para matanggal ang carbon and oxides.
Marami satin gumagamit ng synthetic motor oil as anti rust protection. Minsan ginamit ko sa bagong bili kong pliers ang motor oil nangitim tuloy kaya ako stick na lang sa sewing machine oil.
kailangan yata nakababad sa motor oil kung magatal mo di gagamitin
|
|
